- Rigid thermofoil (RTF) doors, which feature a durable plastic coating over fiberboard, are an affordable alternative to wood or laminate doors.
- Plastic laminates come in hundreds of colors and patterns, are durable and moisture-resistant, and are reasonably priced. You can pick matching or contrasting laminates for your doors and drawer fronts.
- Real wood veneers include many standard species, such as oak, cherry, and maple, and you also can choose from an array of stain colors. Wood veneers are the most expensive option. Wood must be carefully sealed to protect against moisture.
Further customize and update the look of your cabinets with new kitchen cabinet hardware.
What Are the Pros and Cons?
Kitchen cabinet refacing pros:
- Costs about half as much as replacing cabinets.
- Takes less time (a week or less!) and money.
- It’s less hassle than tearing out cabinets.
- You can still use your kitchen while refacing.
- It’s a green kitchen remodeling solution because you’re not adding to the landfill
Kitchen cabinet refacing cons (there aren’t many):
- Refacing won’t fix a bad kitchen design.
- You might be tempted to spend more on exotic veneer and hardware (saving you less)
What Does Refacing Cost?
A professional cabinet refacing for a typical 10-foot-by-12-foot kitchen starts at around $1,000 to $3,000 for laminate. Expect to pay $2,500 to $6,000 for real wood veneer. Costs can rise to $7,000 to $9,000 or more for a large project with high-quality wood veneer.
Finishing the project with new hardware (pulls, knobs, hinges) runs $2 to $4 per piece, up to $20 to $50 each for high-end hardware.
In comparison, completely replacing old kitchen cabinets with new cabinets starts at $4,000 to $5,000 and up for stock cabinets; $8,000 to $10,000 for semi-custom cabinets; $16,000 to $20,000 and up for custom-made cabinetry.
How Do I Know If My Cabinets Are Good for Refacing?
Refacing is feasible if your existing cabinet boxes are structurally sound and in good condition. Cabinets with water damage, warping, and broken frames are poor candidates. Particleboard cabinetry sometimes requires fasteners, in addition to adhesives, to ensure that the veneer is secure.
How Are They Installed?
A professional installer will come to your house to measure your cabinets and determine the amount of veneer required, the correct sizes and quantities for door and drawer fronts, and how much hardware is needed. Newly ordered doors and drawer fronts may take one to two weeks for delivery.
When all the materials are in hand, your installer removes old cabinet door and drawer fronts, and prepares the surface of the cabinet boxes by washing the exteriors with a degreaser and lightly sanding the finish. Any significant flaws in the surface are repaired or filled to ensure a smooth, secure fit for the new veneer.
The installer applies veneer to the cabinet faces and any exposed cabinet ends, then mounts the new doors, drawer fronts, and hardware. The process typically takes two to four days.